The Calculation

Features The Calculation

The calculation uses body proportion and algorithms to work out height differences in certain positions.
The aim is to use the sliders to get the +/- value to zero.
First set the female and male height sliders, then set the heels.
The Tip-toe option works out the maximum female height increase for barefoot standing on tip-toes.Set the other sliders as required.
The raise height slider is used to set a known object height for additional boost, especially for the standing/kneeling option.After setting the sliders, press the ‘calculate position’ button you want to use.The +/- display will show how close you are.
If the value is positive, then that’s the female height still needed to be raised.
If negative, then the female height needs to be lowered.Make adjustments and press the same ‘calculate position’ button again.
After each adjustment press button to calculate.
*Only requires your partners height and heel size (if wearing).*Calculates three positions: Both standing, both kneeling, standing/kneeling (These are with male behind female)*Converter slider for cm-inches-feet/inches*Tip-toe option for female standing position*Save and retrieve slider valuesNotes – Setting heel size - set to the actual size of the heel.
Due to the pivot point of the ankle, the height increase is not the same as the height of the heel.
This is adjusted by the app.
The ‘x’ value is the female height from ground level.Pressing the kneeling position button will zero the heel sliders as these are not needed for this calculation.
Pressing the standing/kneeling button will zero the female heel slider.Leg/knee spread – knee spread is limited to 80cm.
If the slider is set above this, it will default back to 80 when the kneeling, standing/kneeling buttons are pressed.
Disclaimer: Due to differences in body proportions, the results may not be perfectly accurate for everyone.
However they should get you there or thereabouts.